An iPhone stuck on the Restore screen is a very annoying situation that limits the use of the device. Unless it is a very rare case or an internal hardware problem, this behavior is caused by a failed iOS system update, and the most viable solution is to connect the phone to the computer and iTunes will take care of restoring it. , although it is also possible to use the 3uTools tool.
Indeed, 3uTools is a tool that allows you to manage the content of the iPhone but also fulfills the function of updating and restoring the device’s firmware, being able to download the appropriate official iOS versions depending on the iPhone model. In turn, it has a function to exit recovery mode that can prevent a general reset of the terminal, with the consequent loss of personal information in case the iPhone has a backup copy.
How to download 3uTools to your PC
Enter the official page of the software http://www.3u.com/ and click the Download button. You should note that for 3Tools to work properly you need iTunes installed on your computer. On Windows, the best way to download the latest version of iTunes is provided by the Microsoft Store, accessible from the taskbar.
Get out of iPhone recovery mode using 3uTools
Open 3uTools and connect the problem iPhone to the computer with a genuine or Apple-certified USB cable.
Check on the program screen that 3uTools has detected the iPhone in recovery mode and click Exit Recovery Mode.
If successful, close the program and use your iPhone as normal. Otherwise, perform the next step.
Restore an iPhone stuck in Recovery mode with 3uTools
Reconnect the iPhone stuck in Recovery mode to the computer. Once it is detected by 3uTools click on the Go Flash option which will allow you to restore iPhone firmware.
As the next step, go to the right side of the screen and select the latest iOS version that is compatible with your iPhone. Then click Download.
Once the download is complete, select the Quick Flash Mode option and click Flash.
Once this is done, the iPhone factory restore process will begin. Once finished, you will have to configure your phone from scratch and, if necessary, restore a backup made previously.
What to do if 3uTools fails to fix iPhone stuck?
If the above steps don’t resolve the stuck iPhone, try resetting the iPhone but in DFU mode, an advanced troubleshooting mode.
For this, go back to the 3uTools screen and click on the Smart Flash option. Then go to the right side and click on Pro Flash. Connect your iPhone to the computer and follow the instructions on the screen to put the terminal in DFU mode.
Once done, click on the Flash option. Wait for the process to finish.
If the program is unsuccessful or hangs in any of its phases, it is most likely that the iPhone has a hardware problem that requires a review by specialized personnel.